View R463F315000M1M_8958743.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

? kemet electronics corporation ? p.o. box 5928 ? greenville, sc 29606 (864) 963-6300 ? www.kemet.com f3 095_r46_x2_310_110c ? 9/27/2016 1 benefts ? approvals: enec, ul, cul, cqc ? cl ass x2 (iec 60384-14) ? ra ted voltage: 310 vac 50/60 hz ? ca pacitance range: 0.01 C 10 f ? le ad spacing: 10.0 C 37.5 mm ? cap acitance tolerance: 20%, 10% ? cl imatic category: 40/110/56, iec 60068C1 ? ta pe and reel in accordance with iec 60286C2 ? ro hs compliant and lead-free terminations ? operating t emperature r ange o f ? 40?c t o + 110?c ? 10 0% screening factory test at 2,200 vdc/1,500 vac ? se lf-healing properties overview the r46 series is constructed of metallized polypropylene flm encapsulated with self-extinguishing r esin in a bo x of material meeting the requir ements of ul 94 vC0. applications for worldwide use in electromagnetic interference (emi) suppression in across-the-line applications requiring x2 safety classifcation. intended for use in situations wher e capacitor failur e would not result in exposure to electric shock. not for use in series with mains type applications. metallized polypropylene film emi suppression capacitors r46 series, class x2, 310 vac, 110oc part number system r46 3 n 3150 00 01 m series rated voltage (vac) lead spacing (mm) capacitance code (pf) packaging internal use capacitance tolerance x2, metallized polypropylene 3 = 310 f = 10.0 i = 15.0 n = 22.5 r = 27.5 w = 37.5 the last three digits represent signifcant f gures. th e f rst d igit sp ecifes n umber of z eros t o b e add ed. see ordering options t able 01 02 l2 m1 m2 n0 n1 n2 k = 10% m = 20% one world. one kemet
? kemet electronics corporation ? p.o. box 5928 ? greenville, sc 29606 (864) 963-6300 ? www.kemet.com f3 095_r46_x2_310_110c ? 9/27/2016 2 ordering options table lead spacing nominal (mm) type of leads and packaging lead length (mm) lead and packaging code 10, 15, 22.5 standard lead and packaging options bulk (bag) C short leads 4 +2/-0 00 ammo pack h 0 = 18.5 +/-0.5 dq 3xliv0ieherh4egoekmrk3txmsrw tape & reel (large reel) h 0 = 18.5 +/-0.5 ck bu lk (bag) C short leads 2.7 + 0.5/-0 ja bulk (bag) C short leads 3.5 +0 .5/-0 jb bulk (bag) C short leads 4.0 + 0.5/-0 je bulk (bag) C short leads 3.2 +0 .3/-0.2 jh bulk (bag) C long leads 18 + 1/-1 jm bulk (bag) C long leads 30 + 5/-0 40 bulk (bag) C long leads 25 + 2/-1 50 bulk (bag) C insulated rigid leads 30 + 5/-0 ( sp 8 +2/-2) 51 bulk ( bag) C i nsulated f lexible l eads 150 +5 /-5 (s p 8+ 2/-2) 52 27.5 standard lead and packaging options bulk (bag) C short leads 4 +2/-0 00 tape & reel (large reel) h 0 = 18.5 +/-0.5 ck 3xliv0ieherh4egoekmrk3txmsrw bulk (bag) C short leads 2.7 +0.5/-0 ja bulk (bag) C short leads 3.5 +0.5/-0 jb bulk (bag) C short leads 4.0 +0.5/-0 je bulk (bag) C short leads 3.2 +0.3/-0.2 jh bulk (bag) C long leads 18 +1/-1 jm bulk (bag) C long leads 30 +5/-0 40 bulk (bag) C long leads 25 +2/-1 50 bulk (bag) C insulated rigid leads 30 +5/-0 (sp 8+2/-2) 51 bulk (bag) C insulated flexible leads 150 +5/-5 (sp 8+2/-2) 52 7xerhevh0ieherh4egoekmrk3txmsrw bulk (bag) C short leads 4 +2/-0 00 3xliv0ieherh4egoekmrk3txmsrw bulk (bag) C short leads 2.7 +0.5/-0 ja bulk (bag) C short leads 3.5 +0.5/-0 jb bulk (bag) C short leads 4.0 +0.5/-0 je bulk (bag) C short leads 3.2 +0.3/-0.2 jh bulk (bag) C long leads 18 +1/-1 jm bulk (bag) C long leads 30 +5/-0 40 bulk (bag) C long leads 25 +2/-1 50 bulk (bag) C insulated rigid leads 30 +5/-0 (sp 8+2/-2) 51 bulk (bag) C insulated flexible leads 150 +5/-5 (sp 8+2/-2) 52 metallized polypropylene film emi suppression capacitors r46 series, class x2, 310 vac, 110oc
? kemet electronics corporation ? p.o. box 5928 ? greenville, sc 29606 (864) 963-6300 ? www.kemet.com f3 095_r46_x2_310_110c ? 9/27/2016 3 dimensions C millimeters h p ll d l b front view side view l b h 8 2 35 +0/-5 d loose insulated rigid leads front view side view l b h 8 2 150 5 d insulated flexible leads 0.5 mm 2 front view side view p b h l d nominal tolerance nominal tolerance nominal tolerance nominal tolerance nominal tolerance 10.0 +/-0.4 +0.2 +0.1 +0.2 +/-0.05 +/-0.4 +0.2 +0.1 +0.2 +/-0.05 +/-0.4 +0.2 +0.1 +0.2 +/-0.05 +/-0.4 +0.2 +0.1 +0.3 +/-0.05 +/-0.4 +0.2 +0.1 +0.3 +/-0.05 +/-0.4 +0.2 +0.1 +0.3 +/-0.05 +/-0.4 +0.2 +0.1 +0.5 +/-0.05 +/-0.4 +0.2 +0.1 +0.5 +/-0.05 +/-0.4 +0.2 +0.1 +0.5 +/-0.05 +/-0.4 +0.2 +0.1 +0.5 +/-0.05 +/-0.4 +0.2 +0.1 +0.5 +/-0.05 +/-0.4 +0.2 +0.1 +0.5 +/-0.05 +/-0.4 +0.2 +0.1 +0.5 +/-0.05 +/-0.4 +0.2 +0.1 +0.3 +/-0.05 +/-0.4 +0.2 +0.1 +0.3 +/-0.05 +/-0.4 +0.2 +0.1 +0.3 +/-0.05 +/-0.4 +0.2 +0.1 +0.3 +/-0.05 +/-0.4 +0.2 +0.1 +0.3 +/-0.05 +/-0.4 +0.2 +0.1 +0.3 +/-0.05 +/-0.4 +0.2 +0.1 +0.3 +/-0.05 +/-0.4 +0.2 +0.1 +0.3 +/-0.05 +/-0.4 +0.2 +0.1 +0.3 +/-0.05 +/-0.4 +0.2 +0.1 +0.3 +/-0.05 +/-0.4 +0.2 +0.1 +0.3 +/-0.05 +/-0.4 +0.2 +0.1 +0.3 +/-0.05 note: see ordering options table for lead length (ll/h 0 ) options. metallized polypropylene film emi suppression capacitors r46 series, class x2, 310 vac, 110oc
? kemet electronics corporation ? p.o. box 5928 ? greenville, sc 29606 (864) 963-6300 ? www.kemet.com f3 095_r46_x2_310_110c ? 9/27/2016 4 dimensions C millimeters cont'd h p ll d l b front view side view l b h 8 2 35 +0/-5 d loose insulated rigid leads front view side view l b h 8 2 150 5 d insulated flexible leads 0.5 mm 2 front view side view p b h l d nominal tolerance nominal tolerance nominal tolerance nominal tolerance nominal tolerance 37.5 +/-0.4 +0.3 +0.1 +0.3 +/-0.05 +/-0.4 +0.3 +0.1 +0.3 +/-0.05 +/-0.4 +0.3 +0.1 +0.3 +/-0.05 +/-0.4 +0.3 +0.1 +0.3 +/-0.05 +/-0.4 +0.3 +0.1 +0.3 +/-0.05 +/-0.4 +0.3 +0.1 +0.3 +/-0.05 +/-0.4 +0.3 +0.1 +0.3 +/-0.05 note: see ordering options table for lead length (ll/h 0 ) options. metallized polypropylene film emi suppression capacitors r46 series, class x2, 310 vac, 110oc
? kemet electronics corporation ? p.o. box 5928 ? greenville, sc 29606 (864) 963-6300 ? www.kemet.com f3 095_r46_x2_310_110c ? 9/27/2016 5 performance characteristics dielectric polypropylene fl m plates metal l ayer d eposited b y e vaporation u nder va cuum winding non-inductive type leads tinned wire protection plastic c ase, t hermosetting r esin f lled. b ox m aterial i s s olvent r esistant a nd f ame r etardant a ccording t o u l94. related documents iec 60384-14, en 60384-14 rated voltage (v r ) 310 vac (50/60 hz), 630 vdc capacitance range 0.010 f to 10 f capacitance values e6 s eries ( iec 6 0063) m easured @ 1 k hz a nd + 20 1c capacitance tolerance 10%, 20% temperature range ?40oc t o + 110c climatic category 40/110/56 iec 60068-1 storage conditions storage t ime: 2 4 m onths f rom t he d ate m arked o n t he l abel p ackage average r elative h umidity p er y ear 7 0% rh 8 5% f or 3 0 d ays r andomly d istributed t hroughout t he y ear dew i s a bsent temperature: ? 40 t o 8 0c ( see " maximum h umidity i n s torage c onditions" g raph b elow) approvals enec, ul, cul, cqc metallized polypropylene film emi suppression capacitors r46 series, class x2, 310 vac, 110oc
? kemet electronics corporation ? p.o. box 5928 ? greenville, sc 29606 (864) 963-6300 ? www.kemet.com f3 095_r46_x2_310_110c ? 9/27/2016 6 performance characteristics cont'd * typical value impedance graph dissipation factor (tan) 0 .1% ( 0.06%*) @ 1 k hz , + 25c 5c ( * t ypical v alue) test voltage between terminals the 100% screening factory test is carried out at 2,200 vdc/1,500 vac. the voltage level is selected to meet the requirements i n a pplicable e quipment s tandards. a ll e lectrical c haracteristics a re c hecked a fter t he t est. it i s n ot p ermitted t o r epeat t his t est a s t here i s a r isk t o d amage t he c apacitor. k emet i s n ot l iable i n s uch case for any failures. insulation resistance measured a t + 25c 5c, a ccording t o i ec 6 0384C2 minimum values between terminals voltage charge voltage charge time c 0 .33 f c > 0 .33 f 100 vdc 1 minute 1 ? 10 5 m ( 5 ? 10 m )* 30,000 m ? f ( 150,000 m ? f )* recommended vo ltage 6 30 v dc metallized polypropylene film emi suppression capacitors r46 series, class x2, 310 vac, 110oc
? kemet electronics corporation ? p.o. box 5928 ? greenville, sc 29606 (864) 963-6300 ? www.kemet.com f3 095_r46_x2_310_110c ? 9/27/2016 7 environmental test data test iec publication procedure endurance en/iec 60384C14 1.25 x v r vac 50 hz, once every hour increase to 1,000 vac for 0.1 second, 1,000 hours at upper rated temperature vibration iec 60068C2C6 test fc 3 directions at 2 hours each 10 C 55 hz at 0.75 mm or 98 m/s 2 bump iec 6 0068C2C29 t est e b 1,000 b umps a t 3 90 m /s 2 change of temperature iec 60068C2C14 test na upper and lower rated temperature 5 cycles active f lammability iec 60384C14 v r + 20 surge pulses at 2.5 kv (pulse every 5 seconds) pa ssive f lammability iec 60384C14 iec 6 0384C1, i ec 6 0695C11C5 n eedle f ame t est damp heat steady state iec 6 0068C2C78 t est c ab +40c a nd 9 3% r h, 5 6 d ays approvals mark specifcation file number en/iec 60384-14 v4413 ul 60384-14 and can/csa e60384-14 (310vac) e97797 iec 60384-14 cqc08001026549 cqc11001060118 cqc13001087757 cqc14001116028 cqc13001101266 cqc14001116000 environmental compliance all kemet emi capacitors are rohs compliant. metallized polypropylene film emi suppression capacitors r46 series, class x2, 310 vac, 110oc
? kemet electronics corporation ? p.o. box 5928 ? greenville, sc 29606 (864) 963-6300 ? www.kemet.com f3 095_r46_x2_310_110c ? 9/27/2016 8 table 1 C ratings & part number reference capacitance value (f) dimensions in mm lead spacing (p) dv/dt (v/s) new kemet part number legacy part number b h l 0.010 4.0 9.0 13.0 10.0 500 463f2100(1)n0(2) r463f2100(1)n0(2) 0.015 4.0 9.0 13.0 10.0 500 463f2150(1)n0(2) r463f2150(1)n0(2) 0.022 4.0 9.0 13.0 10.0 500 463f2220(1)n0(2) r463f2220(1)n0(2) 0.033 5.0 11.0 13.0 10.0 500 463f2330(1)m1(2) r463f2330(1)m1(2) 0.047 5.0 11.0 13.0 10.0 500 463f2470(1)n0(2) r463f2470(1)n0(2) 0.068 6.0 12.0 13.0 10.0 500 463f2680(1)m1(2) r463f2680(1)m1(2) 0.10 6.0 12.0 13.0 10.0 500 463f3100(1)m1(3) r463f3100(1)m1(3) 0.010 5.0 11.0 18.0 15.0 400 463i2100(1)01(2) r463i2100(1)01(2) 0.015 5.0 11.0 18.0 15.0 400 463i2150(1)01(2) r463i2150(1)01(2) 0.022 5.0 11.0 18.0 15.0 400 463i2220(1)01(2) r463i2220(1)01(2) 0.033 5.0 11.0 18.0 15.0 400 463i2330(1)01(2) r463i2330(1)01(2) 0.047 5.0 11.0 18.0 15.0 400 463i2470(1)01(2) r463i2470(1)01(2) 0.068 5.0 11.0 18.0 15.0 400 463i2680(1)01(2) r463i2680(1)01(2) 0.10 5.0 11.0 18.0 15.0 400 463i3100(1)m1(2) r463i3100(1)m1(2) 0.15 6.0 12.0 18.0 15.0 400 463i3150(1)m2(2) r463i3150(1)m2(2) 0.15 9.0 12.5 18.0 15.0 400 463i3150(1)l2(2) r463i3150(1)l2(2) 0.22 7.5 13.5 18.0 15.0 400 463i3220(1)m2(2) r463i3220(1)m2(2) 0.22 9.0 12.5 18.0 15.0 400 463i3220(1)l2(2) r463i3220(1)l2(2) 0.22 6.0 17.5 18.0 15.0 400 463i3220(1)02(2) r463i3220(1)02(2) 0.33 8.5 14.5 18.0 15.0 400 463i3330(1)n0(2) r463i3330(1)n0(2) 0.33 10.0 16.0 18.0 15.0 400 463i3330(1)m1(2) r463i3330(1)m1(2) 0.33 7.5 18.5 18.0 15.0 400 463i3330(1)02(2) r463i3330(1)02(2) 0.33 13.0 12.0 18.0 15.0 400 463i3330(1)01(2) r463i3330(1)01(2) 0.47 10.0 16.0 18.0 15.0 400 463i3470(1)n0(3) r463i3470(1)n0(3) 0.47 11.0 19.0 18.0 15.0 400 463i3470(1)m1(2) r463i3470(1)m1(2) 0.56 11.0 19.0 18.0 15.0 400 463i3560(1)n0(2) r463i3560(1)n0(2) 0.60 11.0 19.0 18.0 15.0 400 463i3600(1)n0(2) r463i3600(1)n0(2) 0.15 6.0 15.0 26.5 22.5 200 463n3150(1)01(2) r463n3150(1)01(2) 0.22 6.0 15.0 26.5 22.5 200 463n3220(1)m1(2) r463n3220(1)m1(2) 0.33 6.0 15.0 26.5 22.5 200 463n3330(1)n0(2) r463n3330(1)n0(2) 0.47 7.0 16.0 26.5 22.5 200 463n3470(1)n0(2) r463n3470(1)n0(2) 0.68 10.0 18.5 26.5 22.5 200 463n3680(1)m2(2) r463n3680(1)m2(2) 1.0 10.0 18.5 26.5 22.5 200 463n4100(1)n2(3) r463n4100(1)n2(3) 1.0 11.0 20.0 26.5 22.5 200 463n4100(1)n1(2) r463n4100(1)n1(2) 1.5 13.0 22.0 26.5 22.5 200 463n4150(1)n1(2) r463n4150(1)n1(2) 0.47 9.0 17.0 32.0 27.5 150 463r3470(1)01(2) r463r3470(1)01(2) 0.68 9.0 17.0 32.0 27.5 150 463r3680(1)m1(2) r463r3680(1)m1(2) 1.0 11.0 20.0 32.0 27.5 150 463r4100(1)m1(2) r463r4100(1)m1(2) 1.5 13.0 22.0 32.0 27.5 150 463r4150(1)m1(2) r463r4150(1)m1(2) 2.2 13.0 25.0 32.0 27.5 150 463r4220(1)m2(2) r463r4220(1)m2(2) 2.2 14.0 28.0 32.0 27.5 150 463r4220(1)m1(2) r463r4220(1)m1(2) 3.3 18.0 33.0 32.0 27.5 150 463r4330(1)m2(2) r463r4330(1)m2(2) 4.7 18.0 33.0 32.0 27.5 150 463r4470(1)m2(2) r463r4470(1)m2(2) 4.7 22.0 37.0 32.0 27.5 150 463r4470(1)m1(2) r463r4470(1)m1(2) 1.5 11.0 22.0 41.5 37.5 100 463w4150(1)m1(2) r463w4150(1)m1(2) 2.2 11.0 22.0 41.5 37.5 100 463w4220(1)m2(3) r463w4220(1)m2(3) 2.2 13.0 24.0 41.5 37.5 100 463w4220(1)m1(2) r463w4220(1)m1(2) 3.3 16.0 28.5 41.5 37.5 100 463w4330(1)m1(2) r463w4330(1)m1(2) 4.7 16.0 2 8 .5 41.5 37.5 100 463w4470(1)m2(3) r463w4470(1)m2(3) 4.7 19.0 32.0 41.5 37.5 100 463w4470(1)m1(2) r463w4470(1)m1(2) 6.8 20.0 40.0 41.5 37.5 100 463w4680(1)m2(2) r463w4680(1)m2(2) 6.8 24.0 44.0 41.5 37.5 100 463w4680(1)m1(2) r463w4680(1)m1(2) 10.0 30.0 45.0 41.5 37.5 100 463w5100(1)m1(2) r463w5100(1)m1(2) capacitance value (f) b (mm) h (mm) l (mm) lead spacing (p) dv/dt (v/s) new kemet part number legacy part number (1) insert lead and packaging code. see ordering options table for available options. (2) m = 20%, k = 10% (3) m = 20% (only available tolerance). metallized polypropylene film emi suppression capacitors r46 series, class x2, 310 vac, 110oc
? kemet electronics corporation ? p.o. box 5928 ? greenville, sc 29606 (864) 963-6300 ? www.kemet.com f3 095_r46_x2_310_110c ? 9/27/2016 9 manual soldering recommendations following is the recommendation for manual soldering with a soldering iron. the soldering iron tip temperature should be set at 350c (+10c maximum) with the soldering duration not t o exceed more than 3 seconds. recommended soldering temperature 0 50 100 150 200 250 300 350 400 0 1 2 3 4 5 6 7 8 soldering time (sec) soldering iron bit temperature (deg c) soldering process the implementation of the rohs directive has resulted in the selection of snagcu (sac) alloys or sncu alloys as primary solder. this has incr eased the liquidus temper ature fr om that of 183oc for snpb eutectic allo y t o 217 C 221oc for the new allo ys. as a result, the heat str ess t o the components , e ven in wa ve s oldering, has incr eased cons iderably due t o higher pr e-heat and wa ve temperatur es. p olypropylene capacit ors ar e especially s ensitive t o heat (the melting point of poly propylene is 160 C 170oc ). w ave soldering can be destructiv e, especially for mechanically small poly propylene capacit ors (with lead spacing of 5 mm t o 15 mm), and gr eat car e has t o be tak en during s oldering. the r ecommended solder pr ofles fr om keme t should be us ed. please consult kemet with any ques tions. in gener al, the wa ve s oldering cur ve fr om iec publication 61760-1 e dition 2 s erves as a solid guideline for success ful soldering. please see figure 1. refow soldering is not r ecommended for thr ough-hole flm capacit ors. exposing capacit ors t o a soldering pr ofle in ex cess of the abov e the r ecommended limits ma y r esult t o degr adation or permanent damage t o the capacit ors. do not place the polypr opylene capacitor through an adhesive curing oven to cure resin for surface mount components. insert through-hole par ts after the curing of sur face mount par ts. cons ult ke met t o discus s the actual temper ature pr ofle in the o ven, if through-hole components must pass through the adhesive curing process. a maximum two soldering cycles is recommended. please allow time for the capacit or sur face temper ature t o r eturn t o a normal temper ature befor e the second soldering cy cle. wave soldering recommendations 0 50 100 150 200 250 300 0 40 80 120 160 200 240 temperature ( c) time (s) ca 2 c/s ca 3.5 c/s typical ca 5 c/s cooling 2+3s max 115 c max t preheat t <150 c 100 c preheating typical first wave second wave 260 c metallized polypropylene film emi suppression capacitors r46 series, class x2, 310 vac, 110oc
? kemet electronics corporation ? p.o. box 5928 ? greenville, sc 29606 (864) 963-6300 ? www.kemet.com f3 095_r46_x2_310_110c ? 9/27/2016 10 soldering process cont'd wave soldering recommendations cont'd 1. the table indicates the maximum set-up temper ature of the soldering pr ocess figure 1 dielectric film material maximum preheat temperature maximum peak soldering temperature capacitor pitch 1 0 m m capacitor pitch = 15 mm capacitor pitch > 15 mm capacitor pitch 1 5 m m capacitor pitch > 15 mm polyester 130c 130c 130c 270c 270c polypropylene 100c 110c 130c 260c 270c paper 130c 130c 140c 270c 270c polyphenylene sulphide 150c 150c 160c 270c 270c 2. the maximum temperature measured inside the capacitor: set th e t emperature s o th at i nside th e e lement th e m aximum t emperature i s b elow th e l imit: dielectric film material maximum temperature measured inside the element polyester 160c polypropylene 110c paper 160c polyphenylene sulphide 160c temperature monitored inside the capacitor. selective soldering recommendations selective dip soldering is a v ariation of r efow soldering. in this method, the printed cir cuit boar d with thr ough-hole components t o be solder ed is pr eheated and tr ansported o ver the solder bath as in normal fow soldering without t ouching the solder . when the boar d is o ver the bath, it is st opped and pr e-designed solder pots ar e lifted fr om the bath with molten solder only at the places of the selected components, and pr essed against the lower sur face of the boar d t o solder the components. the temper ature pr ofle for selectiv e soldering is similar t o the double wa ve fow soldering outlined in this document, howev er, instead of two baths, there is only one bath with a time from 3 to 10 seconds. in selective soldering, the risk of overheating is gr eater than in double wa ve fow soldering, and gr eat car e must be tak en so that the par ts ar e not o verheated. metallized polypropylene film emi suppression capacitors r46 series, class x2, 310 vac, 110oc
? kemet electronics corporation ? p.o. box 5928 ? greenville, sc 29606 (864) 963-6300 ? www.kemet.com f3 095_r46_x2_310_110c ? 9/27/2016 11 construction detailed cross section self-extinguishing resin molded plastic case molded plastic case leads metal contact layer metal contact layer margin single-sided metallized polypropylene film (second layer) single-sided metallized polypropylene film (first layer) margin margin single-sided metallized polypropylene film film winding scheme options 1 section single-sided metallized polypropylene film single-sided metallized polypropylene film single-sided metallized polypropylene film single-sided metallized polypropylene film 2 sections 3 sections 4 sections single-sided metallized polypropylene film polypropylene film dielectric 1 section double-sided metallized polyester film 3 sections double-sided metallized polyester carrier film polypropylene film dielectric double-sided metallized polyester carrier film 2 sections polypropylene film dielectric double-sided metallized polyester carrier film single-sided metallized polypropylene film 4 sections polypropylene film dielectric double-sided metallized polyester carrier film polypropylene film dielectric 1 section polypropylene film/foil 2 sections metal foil metal foil single-sided metallized polypropylene film polypropylene film dielectric metallized polyphenyl- ene sulfide film with vacuum-evaporated aluminum electrodes 1 section metallized polyphenylene sulfide film (smr) metallized impregnated paper 1 section metallized impregnated paper single-sided metallized polyester film 1 section single-sided metallized polyester film polypropylene film dielec- tric 1 section axial - polypropylene film/foil 2 sections metal foil single-sided metallized polypropylene film polypropylene film dielectric metal foil single-sided metallized polypropylene film 2 sections polypropylene film dielectric double-sided metallized polyester carrier film single-sided metallized polypropylene film 1 section axial - single-sided metallized polypropylene film single-sided metallized polyester film 1 section axial - single-sided metallized polyester film axial - double-sided metallized polyester film winding scheme metallized polypropylene film emi suppression capacitors r46 series, class x2, 310 vac, 110oc
? kemet electronics corporation ? p.o. box 5928 ? greenville, sc 29606 (864) 963-6300 ? www.kemet.com f3 095_r46_x2_310_110c ? 9/27/2016 12 marking iec climatic category approval marks top front lead spacing 10 mm manufacturer?s logo manufacturing plant iec climatic category approval marks top front series capacitance, capacitance tolerance, rated voltage manufacturing plant lead spacing 22.5 mm (large case sizes), 27.5 mm, 37.5 mm manufacturer?s logo dielectric code safety class self healing passive flammability category date code qa number capacitance tolerance date code capacitance, rated voltage series, dielectric code, safety class, self healing iec climatic category approval marks top front lead spacing 15 mm, 22.5 mm (small case sizes) manufacturer?s logo passive flammability category manufacturing plant capacitance tolerance date code capacitance, rated voltage series, dielectric code, safety class, self healing passive flammability category: b for volume 1750 mm 3 c for volume < 1750 mm 3 metallized polypropylene film emi suppression capacitors r46 series, class x2, 310 vac, 110oc
? kemet electronics corporation ? p.o. box 5928 ? greenville, sc 29606 (864) 963-6300 ? www.kemet.com f3 095_r46_x2_310_110c ? 9/27/2016 13 marking cont'd iec climatic category approval marks top front lead spacing 10 mm manufacturer?s logo manufacturing plant iec climatic category approval marks top front series capacitance, capacitance tolerance, rated voltage manufacturing plant lead spacing 22.5 mm (large case sizes), 27.5 mm, 37.5 mm manufacturer?s logo dielectric code safety class self healing passive flammability category date code qa number capacitance tolerance date code capacitance, rated voltage series, dielectric code, safety class, self healing iec climatic category approval marks top front lead spacing 15 mm, 22.5 mm (small case sizes) manufacturer?s logo passive flammability category manufacturing plant capacitance tolerance date code capacitance, rated voltage series, dielectric code, safety class, self healing passive flammability category: b for volume 1750 mm 3 c for volume < 1750 mm 3 1eryjegxyvmrk(exi'shi-)' y = year, z = month year code month code 2000 m january 1 2001 n february 2 2002 p march 3 2003 r april 4 2004 s may 5 2005 t june 6 2006 u july 7 2007 v august 8 2008 w september 9 2009 x october o 2010 a november n 2011 b december d 2012 c 2013 d 2014 e 2015 f 2016 h 2017 j 2018 k 2019 l 2020 m metallized polypropylene film emi suppression capacitors r46 series, class x2, 310 vac, 110oc
? kemet electronics corporation ? p.o. box 5928 ? greenville, sc 29606 (864) 963-6300 ? www.kemet.com f3 095_r46_x2_310_110c ? 9/27/2016 14 packaging quantities lead spacing (mm) thickness (mm) height (mm) length (mm) bulk short leads bulk long leads standard reel ? 355 mm large reel ? 500 mm ammo taped 10 4 9 13 2000 1800 750 1500 1000 5 11 13 1300 1500 600 1250 800 6 12 13 1000 1200 500 1000 680 5 11 18 2000 1000 600 1250 800 6 12 18 1750 900 500 1000 680 6 17.5 18 1000 700 500 1000 680 7.5 13.5 18 1000 700 350 800 500 7.5 18.5 18 900 500 C 800 500 8.5 14.5 18 1000 500 300 700 440 9 12.5 18 1000 520 270 650 410 10 16 18 750 500 300 600 380 11 19 18 450 350 C 500 340 13 12 18 750 490 200 480 280 6 15 26.5 805 500 C 700 464 7 16 26.5 700 500 C 550 380 10 18.5 26.5 396 300 C 350 235 11 20 26.5 360 250 C 350 217 13 22 26.5 300 200 C 300 C 9 17 32 816 408 C 450 C 11 20 32 560 336 C 350 C 13 22 32 480 288 C 300 C 13 25 32 480 288 C C C 14 28 32 352 176 C C C 18 33 32 256 128 C C C 22 37 32 168 112 C C C 11 22 41.5 420 252 C C C 13 24 41.5 360 216 C C C 16 28.5 41.5 216 108 C C C 19 32 41.5 192 96 C C C 20 40 41.5 126 84 C C C 24 44 41.5 108 72 C C C 30 45 41.5 90 60 C C C metallized polypropylene film emi suppression capacitors r46 series, class x2, 310 vac, 110oc
? kemet electronics corporation ? p.o. box 5928 ? greenville, sc 29606 (864) 963-6300 ? www.kemet.com f3 095_r46_x2_310_110c ? 9/27/2016 15 lead taping & packaging (iec 60286C2) taping specif cation description symbol dimensions (mm) lead space tol. 10 15 22.5 27.5 fig. 1 fig. 2 fig. 3 fig. 3 lead wire diameter d 0.6 0.6 C 0.8 0.8 0.8 0.05 taping lead space p 25.4 25.4 38.1 38.1 1 feed hole lead space * p 0 12.7 12.7 12.7 12.7 0.2 ** centering of the lead wire p 1 7.7 5.2 7.8 5.3 0.7 centering of the body p 2 12.7 12.7 19.05 19.05 1.3 lead spacing (pitch) *** f 10 15 22.5 27.5 +0.6/?0.1 component alignment ?h 0 0 0 0 2 height of component from tape center h 0 **** 18.5 18.5 18.5 18.5 0.5 carrier tape width w 18 18 18 18 +1/?0.5 hold down tape width w 0 9 10 10 10 minimum hole position w 1 9 9 9 9 0.5 hold down tape position w 2 3 3 3 3 maximum feed hole diameter d 0 4 4 4 4 0.2 tape thickness t 0.7 0.7 0.7 0.7 0.2 * also available in 15 mm. ** max 1 mm on 20 lead spaces. *** pitches 15 mm and 10 mm taped to 7.5 mm (crimped leads) available upon request. **** h 0 = 16.5 mm available upon request. p p 2 p 0 f h 0 w h p 1 d 0 w 2 w 1 w 0 h ?d t p p 2 p 1 metallized polypropylene film emi suppression capacitors r46 series, class x2, 310 vac, 110oc figure 1 lead spacing 10 mm figure 2 lead spacing 15 mm figure 3 lead spacing 22.5 ? 27.5 mm
? kemet electronics corporation ? p.o. box 5928 ? greenville, sc 29606 (864) 963-6300 ? www.kemet.com f3 095_r46_x2_310_110c ? 9/27/2016 16 lead taping & packaging (iec 60286C2) cont'd ammo specif cations dimensions (mm) h w t 360 340 59 reel specif cations reel size dimensions (mm) d h w standard 355 30 55 maximum large 500 25 metallized polypropylene film emi suppression capacitors r46 series, class x2, 310 vac, 110oc d w h h t w
? kemet electronics corporation ? p.o. box 5928 ? greenville, sc 29606 (864) 963-6300 ? www.kemet.com f3 095_r46_x2_310_110c ? 9/27/2016 17 kemet electronic corporation sales off ces for a complete list of our global sales off ces, please visit www.kemet.com/sales. disclaimer all product specif cations, statements, information and data (collectively, the information) in this datasheet are subject to change. the customer is responsible for checking and verifying the extent to which the information contained in this publication is applicable to an order at the time the order is placed. all information given herein is believed to be accurate and reliable, but it is presented without guarantee, warranty, or responsibility of any kind, expressed or implied. statements of suitability for certain applications are based on kemet electronics corporations (kemet) knowledge of typical operating conditions for such applications, but are not intended to constitute C and kemet specif cally disclaims C any warranty concerning suitability for a specif c customer application or use. the information is intended for use only by customers who have the requisite experience and capability to determine the correct products for their application. any technical advice inferred from this information or otherwise provided by kemet with reference to the use of kemets products is given gratis, and kemet assumes no obligation or liability for the advice given or results obtained. although kemet designs and manufactures its products to the most stringent quality and safety standards, given the current state of the art, isolated component failures may still occur. accordingly, customer applications which require a high degree of reliability or safety should employ suitable designs or other safeguards (such as installation of protective circuitry or redundancies) in order to ensure that the failure of an electrical component does not result in a risk of personal injury or property damage. although all productCrelated warnings, cautions and notes must be observed, the customer should not assume that all safety measures are indicted or that other measures may not be required. kemet is a registered trademark of kemet electronics corporation. metallized polypropylene film emi suppression capacitors r46 series, class x2, 310 vac, 110oc

▲Up To Search▲

Price & Availability of R463F315000M1M

	To Download R463F315000M1M Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .